World Association of News Publishers


Botnia Print in Finland: Smart solutions for extra flexibility and capacity

Language switcher

Available in:

Botnia Print in Finland: Smart solutions for extra flexibility and capacity

Article ID:

22761

21.01.2020 – Ten years after starting operations, semi-commercial business is a growing factor for Botnia Print in central Finland. So to keep pace with changing requirements, this joint venture between two regional publishing houses has invested in a second Ferag SNT-50 trimming drum and a conversion of its bundling line.

In order to keep pace with changing requirements, the Finnish printing plant Botnia Print has invested in a second Ferag SNT-50 trimming drum and a conversion of its bundling line.

The Botnia Print plant in Kokkola (Swedish: Karleby) was founded as recently as 2010 by two media companies: Keski-Pohjanmaan Kirjapaino Oyj with a 65 percent equity stake, and HSS Media Ab. Both have contributed their own titles – HSS Media with its Vasabladet, Österbottens Tidning and Südösterbotten newspaper brands, KPK with its regional newspaper Keskipohjanmaa and several local titles. Botnia Print now produces a total of around 100,000 daily newspaper copies every night.

Although the joint venture partners’ own publishing houses are still the ones largely responsible for keeping the printing plant busy, business with outside customers has grown steadily and now fills bit more then one third of Botnia Print’s capacity. Those customers come from Finland as well as neighbouring Sweden across the Baltic Sea – the region south of the Kokkola printing site is traditionally bilingual.

That the company’s products include not only newspapers but also local magazines, customer magazines and commercial print products is due primarily to the Koenig & Bauer Cortina waterless newspaper press: it facilitates quality superior to standard coldset printing and indeed is the only one in Finland. Botnia Print currently employs around 35 people and generates sales of around 10 million euros.

Versatile technical capabilities
At the time the printing plant went up on a greenfield site, it was equipped with two Ferag lines each consisting of a RollSertDrum inserting drum, a RollStream precollecting line with four JetFeeder hoppers, MultiDisc buffering solutions and two MultiStack compensating stackers. Joining those is a wide range of processing capabilities: a Ferag SNT-50 was purchased for three-sided trimming, a StreamStitch stitching unit allows stitched products as well, and a StreamFold line brings capability for producing a third fold.

However, ongoing change in the product portfolio began turning the sole trimming drum into a bottleneck factor. It was a similar story with the PKT bundle dispatch solution downstream of the four compensating stackers: with bundles becoming smaller yet more numerous, existing mailroom capacity was increasingly overstrained. In result, finishing throughput slowed to the point where it could no longer keep pace with printing capacity.

Space-saving solutions
Delivering a second SNT-50 was of course no problem for Ferag. But first, space would have to be created in the mailroom, which over the years had been equipped with ever more machinery. Ferag did finally find a spot where the additional trimming drum could be linked in with the UTR paced conveyor. But to accomplish this, the existing layer palletizer would first have to be repositioned and converted.

Ferag engineers also developed a simple and hence cost-effective bundle dispatch solution: whereas bundles from all four MultiStack compensating stackers were previously steered onto a classic elliptical PKT capable of conveying around 75 bundles per minute, Ferag has now converted this to a figure-of-eight, meaning the plate chain conveyor is already partially emptied when it passes compensating stackers 3 and 4. That made it possible to increase bundle formation capacity by 40 percent – simply with this relatively inexpensive conversion affecting only the channel and chain.

As Hannu Salmi, managing director of Botnia Print Oy Ab, and plant manager Toni Klemola both confirm, the conversion project itself went without a single hitch. Although Botnia Print operates two shifts every day from Monday to Friday, there is only one shift at weekends. The Ferag technicians thus made use of three weekends for the conversion, without affecting production. The second trimming drum has done more than increase flexibility, production reliability and mailroom throughput: according to Hannu Salmi the partial rearrangement of machinery even leaves the impression of more available space than before, despite presence of an additional module.

The Finnish printing plant Botnia Print in Kokkola was founded as recently as 2010 by two media companies: Keski-Pohjanmaan Kirjapaino Oyj and HSS Media Ab.

About Ferag AG:
Ferag AG, with its headquarters at Hinwil in Switzerland, has for over 60 years been known and respected in the printing industry for high quality, absolute dependability and perfect customer support. The traditional, family-owned company is seen as the undisputed market and technological leader in the development, manufacture and marketing of postpress processing and direct mailing systems. Ferag is also a specialist in innovative conveyor and processing technology for the most varied industrial applications and goods distribution systems. Through its worldwide sales organization, the company is active in more than 20 countries with its own sales and service companies or agencies.
(https://www.ferag.com)


Attachments

Author

Michael Spinner-Just's picture

Michael Spinner-Just

Date

2020-01-29 13:59

Press releases fresh from the industry as they reach us. Read more ...

The World Printers Forum (WPF) is an organisation of newspaper printers and suppliers within WAN-IFRA. It promotes the power of print and the sustainability of print production. Read more ...

Publishers and printers around the world have come to expect WAN-IFRA to provide the most up-to-date know-how about production processes, whether it be in prepress, printing, workflow or postpress. Its range of advisory services, trainings, reports and events are unparalleled. Read more ...

WAN-IFRA offers the supplier companies a plethora of platforms to present their valuable products and services to our top-level publishing community, with top-quality exhibitions, events, webinars and workshops, publications, newsletters and more. Read more ...